User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            HP E1401A/B:VXI Mainframe
DATE:                  27-Oct-97
AUTHOR:                User Contributed
REVISION:
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       22
NUMBER OF LINES:       131
CONFIGURATION:         Datron 1281
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P                            F
  1.002  ASK+                                          X
  1.003  IEEE         [@1281]RST
  1.004  IEEE         [@1281]DCV AUTO
  1.005  HEAD         INITIAL CONDITIONS
  1.006  DISP         Connect the E1401 test cable to the rear panel
  1.006  DISP         AUXILLARY connector on the UUT.
  1.007  HEAD         {* Power Supply Checks *}
  1.008  JMP          2.001
  1.009  EVAL
  2.001  DISP         Connect the black ground wire to the 1281 LO INPUT.
  2.002  DISP         Connect wire #1 (orange/green) to the 1281 HI INPUT.
  2.003  IEEE         [@1281]RDG?[D1000][I]
  2.004  ACC          5.000V         100P%
  2.005  MEME
  2.006  MEMC         V              +.250U -.125U
  3.001  IEEE         [@1281]ACV AUTO,TFER_OFF[D2000]
  3.002  IEEE         [@1281]RDG?[D2000][I]
  3.003  MEM*         1000
  3.004  ACC          0.00mV         0.5U
  3.005  MEME
  3.006  MEMC         mV             50.00U        noise
  4.001  IEEE         [@1281]DCV AUTO
  4.002  HEAD         {}
  4.003  JMP          5.001
  4.004  EVAL
  5.001  DISP         Disconnect the wire #1 from the 1281.
  5.002  DISP         Connect wire #2 (red) to the 1281 HI INPUT.
  5.003  IEEE         [@1281]RDG?[D1000][I]
  5.004  ACC          -12.000V       100P%
  5.005  MEME
  5.006  MEMC         V              -.600U +.360U
  6.001  IEEE         [@1281]ACV AUTO,TFER_OFF[D2000]
  6.002  IEEE         [@1281]RDG?[D2000][I]
  6.003  MEM*         1000
  6.004  ACC          0.00mV         0.5U
  6.005  MEME
  6.006  MEMC         mV             50.00U        noise
  7.001  IEEE         [@1281]DCV AUTO
  7.002  HEAD         {}
  7.003  JMP          8.001
  7.004  EVAL
  8.001  DISP         Disconnect the wire #2 from the 1281.
  8.002  DISP         Connect wire #3 (green) to the 1281 HI INPUT.
  8.003  IEEE         [@1281]RDG?[D1000][I]
  8.004  ACC          -24.000V       100P%
  8.005  MEME
  8.006  MEMC         V              -1.20U +.720U
  9.001  IEEE         [@1281]ACV AUTO,TFER_OFF[D2000]
  9.002  IEEE         [@1281]RDG?[D2000][I]
  9.003  MEM*         1000
  9.004  ACC          0.00mV         0.5U
  9.005  MEME
  9.006  MEMC         mV             150.00U       noise
 10.001  IEEE         [@1281]DCV AUTO
 10.002  HEAD         {}
 10.003  JMP          11.001
 10.004  EVAL
 11.001  DISP         Disconnect the wire #3 from the 1281.
 11.002  DISP         Connect wire #4 (black/red/white) to the 1281 HI INPUT.
 11.003  IEEE         [@1281]RDG?[D1000][I]
 11.004  ACC          -2.000V        100P%
 11.005  MEME
 11.006  MEMC         V              -.100U +.100U
 12.001  IEEE         [@1281]ACV AUTO,TFER_OFF[D2000]
 12.002  IEEE         [@1281]RDG?[D2000][I]
 12.003  MEM*         1000
 12.004  ACC          0.00mV         0.5U
 12.005  MEME
 12.006  MEMC         mV             50.00U        noise
 13.001  IEEE         [@1281]DCV AUTO
 13.002  HEAD         {}
 13.003  JMP          14.001
 13.004  EVAL
 14.001  DISP         Disconnect the wire #4 from the 1281.
 14.002  DISP         Connect wire #14 (white/black/red) to the 1281 HI INPUT.
 14.003  IEEE         [@1281]RDG?[D1000][I]
 14.004  ACC          12.000V        100P%
 14.005  MEME
 14.006  MEMC         V              +.600U -.360U
 15.001  IEEE         [@1281]ACV AUTO,TFER_OFF[D2000]
 15.002  IEEE         [@1281]RDG?[D2000][I]
 15.003  MEM*         1000
 15.004  ACC          0.00mV         0.5U
 15.005  MEME
 15.006  MEMC         mV             50.00U        noise
 16.001  IEEE         [@1281]DCV AUTO
 16.002  HEAD         {}
 16.003  JMP          17.001
 16.004  EVAL
 17.001  DISP         Disconnect the wire #14 from the 1281.
 17.002  DISP         Connect wire #15 (green/bl/wh) to the 1281 HI INPUT.
 17.003  IEEE         [@1281]RDG?[D1000][I]
 17.004  ACC          24.000V        100P%
 17.005  MEME
 17.006  MEMC         V              +1.20U -.720U
 18.001  IEEE         [@1281]ACV AUTO,TFER_OFF[D2000]
 18.002  IEEE         [@1281]RDG?[D2000][I]
 18.003  MEM*         1000
 18.004  ACC          0.00mV         0.5U
 18.005  MEME
 18.006  MEMC         mV             150.00U       noise
 19.001  IEEE         [@1281]DCV AUTO
 19.002  HEAD         {}
 19.003  JMP          20.001
 19.004  EVAL
 20.001  DISP         Disconnect the wire #15 from the 1281.
 20.002  DISP         Connect wire #16 (red/black/white) to the 1281 HI INPUT.
 20.003  IEEE         [@1281]RDG?[D1000][I]
 20.004  ACC          -5.200V        100P%
 20.005  MEME
 20.006  MEMC         V              -.260U +.156U
 21.001  IEEE         [@1281]ACV AUTO,TFER_OFF[D2000]
 21.002  IEEE         [@1281]RDG?[D2000][I]
 21.003  MEM*         1000
 21.004  ACC          0.00mV         0.5U
 21.005  MEME
 21.006  MEMC         mV             50.00U        noise
 22.001  END